EMC Celerra

To Next Page

To Previous Page

184

Celerra Network Server Command Reference Manual

The nas Commands

auto_ext = no,virtual_provision=no

stor_devs = APM00042000818-001F,APM00042000818-001D,APM00042000818-0019,APM00042

000818-0016,APM00042000818-001C

disks = d20,d18,d14,d11,d17

disk=d20 stor_dev=APM00042000818-001F addr=c0t1l15 server=server_2

disk=d20 stor_dev=APM00042000818-001F addr=c32t1l15 server=server_2

disk=d18 stor_dev=APM00042000818-001D addr=c0t1l13 server=server_2

disk=d18 stor_dev=APM00042000818-001D addr=c32t1l13 server=server_2

disk=d14 stor_dev=APM00042000818-0019 addr=c0t1l9 server=server_2

disk=d14 stor_dev=APM00042000818-0019 addr=c32t1l9 server=server_2

disk=d11 stor_dev=APM00042000818-0016 addr=c0t1l6 server=server_2

disk=d11 stor_dev=APM00042000818-0016 addr=c32t1l6 server=server_2

disk=d17 stor_dev=APM00042000818-001C addr=c0t1l12 server=server_2

disk=d17 stor_dev=APM00042000818-001C addr=c32t1l12 server=server_2

See Example #1 for a description of command output.

EXAMPLE #12 To convert a uxfs file system type named ufs1 to a rawfs, type:

$ nas_fs -Type rawfs ufs1 -Force

name = ufs1

acl = 1432, owner=nasadmin, ID=201

in_use = True

type = rawfs

worm = off

volume = v171

pool = clar_r5_performance

member_of = root_avm_fs_group_3

rw_servers= server_2

ro_servers=

rw_vdms =

ro_vdms =