EMC Celerra

188
Celerra Network Server Command Reference Manual
The nas Commands
EXAMPLE #20 To query the current directory type and translation status for MPD,
type:
$ nas_fs -info ufs1 -option mpd
id = 35
name = ufs1
acl = 0
in_use = True
type = uxfs
worm = off
volume = mtv1
pool =
rw_servers= server_3
ro_servers=
rw_vdms =
ro_vdms =
auto_ext = no,virtual_provision=no
stor_devs =
000190100559-0094,000190100559-0095,000190100559-0096,000190100559-0097
disks = d59,d60,d61,d62
disk=d59 stor_dev=000190100559-0094 addr=c0t4l8-04-0 server=server_3
disk=d59 stor_dev=000190100559-0094 addr=c16t4l8-03-0 server=server_3
disk=d59 stor_dev=000190100559-0094 addr=c32t4l8-08-0 server=server_3
disk=d59 stor_dev=000190100559-0094 addr=c48t4l8-07-0 server=server_3
disk=d60 stor_dev=000190100559-0095 addr=c0t4l9-04-0 server=server_3
disk=d60 stor_dev=000190100559-0095 addr=c16t4l9-03-0 server=server_3
disk=d60 stor_dev=000190100559-0095 addr=c32t4l9-08-0 server=server_3
disk=d60 stor_dev=000190100559-0095 addr=c48t4l9-07-0 server=server_3
disk=d61 stor_dev=000190100559-0096 addr=c0t4l10-04-0 server=server_3
disk=d61 stor_dev=000190100559-0096 addr=c16t4l10-03-0 server=server_3
disk=d61 stor_dev=000190100559-0096 addr=c32t4l10-08-0 server=server_3
disk=d61 stor_dev=000190100559-0096 addr=c48t4l10-07-0 server=server_3
disk=d62 stor_dev=000190100559-0097 addr=c0t4l11-04-0 server=server_3
disk=d62 stor_dev=000190100559-0097 addr=c16t4l11-03-0 server=server_3
disk=d62 stor_dev=000190100559-0097 addr=c32t4l11-08-0 server=server_3
disk=d62 stor_dev=000190100559-0097 addr=c48t4l11-07-0 server=server_3
Multi-Protocol Directory Information
Default_directory_type = DIR3
Needs_translation = False
Translation_state = Completed
Has_translation_error = False
Where: See Example #1 for a description of file system command output.
Value Definition
Default_directory_type the default directory type for the file system. Available types are: DIR3 and COMPAT.