EMC Celerra User Manual

nas_mview
201
The nas Commands
Contacting source_cs for server capabilities...
Analyzing server information...
Source servers available to be configured for remote DR
-------------------------------------------------------
1. server_2:source_cs
2. server_3:source_cs [ local standby ]
v. Verify standby server configuration
q. Quit initialization process
c. Continue initialization
Select a source_cs server: 1
Destination servers available to act as remote standby
------------------------------------------------------
1. server_2:target_cs [ unconfigured standby ]
2. server_3:target_cs [ unconfigured standby ]
b. Back
Select a target_cs server: 1
Source servers available to be configured for remote DR
-------------------------------------------------------
1. server_2:source_cs [ remote standby is server_2:target_cs ]
2. server_3:source_cs [ local standby ]
v. Verify standby server configuration
q. Quit initialization process
c. Continue initialization
Select a source_cs server: 2
Destination servers available to act as remote standby
------------------------------------------------------
server_2:target_cs [ is remote standby for server_2:source_cs ]
2. server_3:target_cs [ unconfigured standby ]
b. Back
Select a target_cs server: 2
Source servers available to be configured for remote DR
-------------------------------------------------------
1. server_2:source_cs [ remote standby is server_2:target_cs ]
2. server_3:source_cs [ remote standby is server_3:target_cs ]
v. Verify standby server configuration
q. Quit initialization process
c. Continue initialization
Select a source_cs server: c
Standby configuration validated OK
Enter user information for managing remote site source_cs
Username: dradmin
Password: ******* Retype your response to validate
Password: *******
Active/Active configuration

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English