202
Celerra Network Server Command Reference Manual
The nas Commands
Initializing (source_cs-->target_cs)
Do you wish to continue? [yes or no] yes
Updating MirrorView configuration cache
Setting up server_3 on source_cs
Setting up server_2 on source_cs
Creating user account dradmin
Setting acl for server_3 on target_cs
Setting acl for server_2 on target_cs
Updating the Celerra domain information
Creating device group mviewgroup on source_cs
done
EXAMPLE #2 To get information about a source MirrorView configuration (for
example, on new_york configured as active/passive), type:
# /nas/sbin/nas_mview -info
***** Device Group Configuration *****
name = mviewgroup
description =
uid = 50:6:1:60:B0:60:26:BC:0:0:0:0:0:0:0:0
state = Consistent
role = Primary
condition = Active
recovery policy = Automatic
number of mirrors = 16
mode = SYNC
owner = 0
mirrored disks =
root_disk,root_ldisk,d5,d8,d10,d11,d24,d25,d26,d27,d29,d30,d31,d32,d33,d39,
local clarid = APM00053001552
remote clarid = APM00053001549
mirror direction = local -> remote
***** Servers configured with RDFstandby *****
id = 1
name = server_2
acl = 1000, owner=nasadmin, ID=201
type = nas
slot = 2
member_of =
standby = server_3, policy=auto
RDFstandby= slot=2
status :
defined = enabled
actual = online, active
To Next Page
Loading...
Need help?
General
