nas_pool
213
The nas Commands
description = Symmetrix STD
acl = 1421
in_use = True
clients = ufs3
members = v169,v171
default_slice_flag = False
is_user_defined = False
disk_type = STD
server_visibility = server_2,server_3,server_4,server_5
volume_profile = symm_std_vp
is_dynamic = True
is_greedy = True
Where:
EXAMPLE #5 To add the volumes, d7 and d8, to the marketing storage pool, type:
$ nas_pool -xtend marketing -volumes d7,d8
id = 20
name = marketing
description = Marketing Storage Pool
acl = 0
in_use = False
clients =
members = d12,d13,d7,d8
default_slice_flag = True
is_user_defined = True
disk_type = CLSTD
server_visibility = server_2,server_3,server_4,server_5
See Example #1 for a description of command output.
Value Definition
id ID of the storage pool.
name name of the storage pool.
description comment assigned to the storage pool.
acl access control level value assigned to the storage pool.
in_use whether the storage pool is being used by a file system.
clients file systems using the storage pool.
members disks used by the storage pool.
default_slice_flag allows slices from the storage pool.
is_user_defined user defined as opposed to system defined.
disk_type contingent on the backend attached.
server_visibility storage pool is visible to the physical Data Movers specified.
volume_profile volume profile used.
is_dynamic whether the system-defined storage pool can add or remove volumes.
is_greedy indicates whether the system-defined storage pool will use new member volumes as needed.
To Next Page
Loading...
Need help?
General
