nas_pool
215
The nas Commands
Where:
EXAMPLE #9 To display information about the user-defined storage pool called
marketing, type:
$ nas_pool -info marketing
id = 20
name = marketing
description = Marketing Storage Pool
acl = 0
in_use = False
clients =
members = d12,d13
default_slice_flag = True
is_user_defined = True
disk_type = CLSTD
server_visibility = server_2,server_3,server_4,server_5
See Example #1 for a description of command output.
EXAMPLE #10 To display information about the system-defined
clar_r5_performance storage pool, type:
$ nas_pool -info clar_r5_performance
id = 3
name = clar_r5_performance
description = CLARiiON RAID5 4plus1
acl = 1421
in_use = False
clients =
members = v120
default_slice_flag = True
is_user_defined = False
disk_type = CLSTD
server_visibility = server_2,server_3,server_4,server_5
volume_profile = clar_r5_performance_vp
is_dynamic = False
is_greedy = True
See Example #4 for a description of command output.
Value Definition
id ID of the storage pool.
inuse whether the storage pool is being used by a file system.
acl access control level value assigned to the storage pool.
name name of the storage pool.
To Next Page
Loading...
