246
Celerra Network Server Command Reference Manual
The nas Commands
status :
defined = enabled
actual = online, active
id = 2
name = server_3
acl = 1000, owner=nasadmin, ID=201
type = nas
slot = 3
member_of =
standby = server_5, policy=auto
status :
defined = enabled
actual = online, ready
id = 3
name = server_4
acl = 1000, owner=nasadmin, ID=201
type = nas
slot = 4
member_of =
standby = server_5, policy=auto
status :
defined = enabled
actual = online, ready
id = 4
name = server_5
acl = 1000, owner=nasadmin, ID=201
type = standby
slot = 5
member_of =
standbyfor= server_4,server_2,server_3
status :
defined = enabled
actual = online, ready
See Example #4 for a description of command output.
EXAMPLE #6 To display information for all VDMs, type:
$ nas_server -info -vdm -all
id = 3
name = vdm_1
acl = 0
type = vdm
server = server_2
rootfs = root_fs_vdm_1
I18N mode = UNICODE
mountedfs =
member_of =
status :
To Next Page
Loading...
