EMC Celerra

nas_server
249
The nas Commands
member_of =
standby = server_5, policy=auto
status :
defined = enabled
actual = online, ready
See Example #4 for a description of command output.
EXAMPLE #12 To delete vdm_1, type:
$ nas_server -delete vdm_1
id = 3
name = vdm_1
acl = 0
type = vdm
server =
rootfs = root_fs_vdm_1
I18N mode = UNICODE
mountedfs =
member_of =
status :
defined = enabled
actual = permanently unloaded
Interfaces to services mapping:
See Example #6 for a description of command output.
EXAMPLE #13 To delete a physical Data Mover using root command, type:
$ /nas/sbin/rootnas_server -delete server_3
id = 2
name = server_3
acl = 0
type = nas
slot = 3
member_of =
standby = server_5, policy=auto
status :
defined = disabled
actual = boot_level=0
See Example #6 for a description of command output.