nas_slice
251
The nas Commands
EXAMPLE #1 To display the slice table, type:
$ nas_slice -list
id inuse slice_of offsetMB sizeMB name
1 n 1 0 134 root_dos
2 n 1 134 1 root_layout
3 y 1 135 16 root_slice_1
4 y 1 151 16 root_slice_2
5 y 1 167 16 root_slice_3
6 y 1 183 16 root_slice_4
7 y 1 199 16 root_slice_5
8 y 1 215 16 root_slice_6
9 y 1 231 16 root_slice_7
10 y 1 247 16 root_slice_8
11 y 1 263 16 root_slice_9
12 y 1 279 16 root_slice_10
13 y 1 295 16 root_slice_11
14 y 1 311 16 root_slice_12
15 y 1 327 16 root_slice_13
16 y 1 343 16 root_slice_14
17 y 1 359 16 root_slice_15
18 y 1 375 16 root_slice_16
19 n 1 391 1 root_log_1
20 n 1 392 1 root_log_2
21 n 1 393 1 root_log_3
22 n 1 394 1 root_log_4
23 n 1 395 1 root_log_5
24 n 1 396 1 root_log_6
25 n 1 397 1 root_log_7
26 n 1 398 1 root_log_8
27 n 1 399 1 root_log_9
28 n 1 400 1 root_log_10
29 n 1 401 1 root_log_11
30 n 1 402 1 root_log_12
31 n 1 403 1 root_log_13
32 n 1 404 1 root_log_14
Note: This is a partial listing of the slice table.
Where:
Value Definition
id ID of the slice.
inuse whether the slice is used.
slice_of volume the slice is sliced from.
offsetMB distance in megabytes from the beginning of the disk to the start of the slice
sizeMB size in megabytes of the slice.
name name of the slice.
To Next Page
Loading...
Need help?
General
