EMC Celerra

252
Celerra Network Server Command Reference Manual
The nas Commands
EXAMPLE #2 To create a slice named slv1 on volume d8 of 1024 MB in size, type:
$ nas_slice -name slv1 -create d8 1024
id = 76
name = slv1
acl = 0
in_use = False
slice_of = d8
offset(MB)= 0
size (MB)= 1024
volume_name = slv1
Where:
EXAMPLE #3 To create a slice volume of 1 GB (1024 MB) with an offset of 1 GB
called slv2 from volume d8, type:
$ nas_slice -name slv2 -create d8 1024 1024
id = 77
name = slv2
acl = 0
in_use = False
slice_of = d8
offset(MB)= 1024
size (MB)= 1024
volume_name = slv2
See Example #2 for a description of command output.
EXAMPLE #4 To display attributes of slv1, type:
$ nas_slice -info slv1
id = 76
name = slv1
acl = 0
in_use = False
slice_of = d8
offset(MB)= 0
size (MB)= 1024
volume_name = slv1
See Example #2 for a description of command output.
Value Definition
id ID of the slice.
name name of the slice.
acl access control level value assigned to the slice.
inuse whether the slice is used.
slice_of volume the slice is sliced from.
offset(MB) distance in Megabytes from the beginning of the disk to the start of the slice.
size (MB) size in Megabytes of the slice.
volume_name volume used to create the slice.