256
Celerra Network Server Command Reference Manual
The nas Commands
-modify { <name> | id=<storage_id> } -network
{ -spa | -spb } <IP>
Modifies the IP address of the CLARiiON backend in the Celerra
Network Server database.
-modify {<name> | id=<storage_id>} -security
[-username <username>][ -password <password>]]
Updates the login information the Celerra uses to authenticate with
the CLARiiON and changes the CLARiiON username and/or
password if the CLARiiON account is changed. If the update is
unsuccessful, the following error is reported:
Error 5010: APM00055105668: Storage API code=4651:
SYMAPI_C_CLAR_NOT_PRIVILEGED
Operation denied by Clariion array - you are not
privileged to perform the requested operation
[-newpassword <new_password]
Assigns a new password to the username on the CLARiiON.
SEE ALSO Celerra Network Server System Operations, nas_rdf, nas_disk,
server_devconfig.
BACKEND OUTPUT The number associated with the storage device is dependent on the
attached backend of the system. CLARiiON backends display a
prefix of APM before a set of integers, for example,
APM00033900124-0019. For example, Symmetrix backends display as
002804000190-003C.
EXAMPLE #1 For the Celerra Network Server with a CLARiiON backend, to list all
attached storage systems, type:
$ nas_storage -list
id acl name serial_number
1 0 APM00042000818 APM00042000818
For the Celerra Network Server with a Symmetrix backend, to list all
attached storage systems, type:
$ nas_storage -list
id acl name serial_number
1 0 000187940260 000187940260
Where:
Value Definition
id ID number of the attached storage system.
acl access control level entry for the attached storage system.
name name assigned to the attached storage system.
serial_number serial number of the attached storage system.
To Next Page
Loading...
Need help?
General
