nas_storage
257
The nas Commands
EXAMPLE #2 For the Celerra Network Server with a CLARiiON backend, to
display information for the attached storage system, type:
$ nas_storage -info APM00042000818
id = 1
arrayname = APM00042000818
name = APM00042000818
type = Clariion
model_type = RACKMOUNT
model_num = 700
db_sync_time = 1131986667 == Mon Nov 14 11:44:27 EST 2005
API_version = V6.0-629
num_disks = 60
num_devs = 34
num_pdevs = 8
num_storage_grps = 1
num_raid_grps = 16
cache_page_size = 8
wr_cache_mirror = True
low_watermark = 60
high_watermark = 80
unassigned_cache = 0
is_local = True
failed_over = False
captive_storage = False
Active Software
-AccessLogix = -
FLARE-Operating-Environment= 02.16.700.5.004
-NavisphereManager = -
Storage Processors
SP Identifier = A
signature = 1057303
microcode_version = 2.16.700.5.004
serial_num = LKE00040201171
prom_rev = 3.30.00
agent_rev = 6.16.0 (4.80)
phys_memory = 3967
sys_buffer = 773
read_cache = 122
write_cache = 3072
free_memory = 0
raid3_mem_size = 0
failed_over = False
hidden = False
network_name = spa
ip_address = 172.24.102.5
subnet_mask = 255.255.255.0
To Next Page
Loading...
