EMC Celerra

server_cifs
313
The server Commands
• cannot begin with an @ (at sign) or - (dash) character.
• not include white space, tab characters, or the following
symbols: / \ : ; , = * + | [ ] ? < > "
[,hidden={y|n}]
By default, the <netbios_name> is displayed in the Network
Neighborhood. If hidden=y is specified, the <netbios_name>
does not appear.
[[,interface=<if_name>[,wins=<ip>[:<ip>]]]...]
Specifies a logical IP interface for the CIFS server in the Windows
NT 4.0 domain and associates up to two WINS IP addresses with
each interface. The interface name is case sensitive.
Note: When configuring a CIFS server without any interfaces for a Data
Mover, it becomes the default CIFS server and is available on all
interfaces not used by other CIFS servers. The default CIFS server can be
deleted at any time. EMC recommends that IP interfaces should always
be specified. VDMs do not have default CIFS servers.
[,local_users]
Enables local user support that allows the creation of a limited
number of local user accounts on the CIFS server. When this
command executes, enter and confirm a password that is
assigned to the local Administrator account on the CIFS server. In
addition to the Administrator account, a Guest account is also
created. The Guest account is disabled by default. The
Administrator account password must be changed before the
Administrator account can log in to the CIFS server.
After initial creation of the standalone server, the local_users
option resets the local Administrator account password. The
password can only be reset if it has not been changed through a
Windows client. If the password has already been changed
through Windows, the reset will be refused.
[-comment <comment>]
Assigns a comment enclosed with quotes to the configuration.
Comments are limited to 48 ASCII characters. Non-ASCII
characters are not supported. Colons should not be used within
the quote since they are recognized as delimiters.
-add compname=<comp_name>,domain=<full_domain_name>
Configures a CIFS server as the <comp_name> in the specified
Windows 2000 or later Active Directory workgroup. A default