314
Celerra Network Server Command Reference Manual
The server Commands
NetBIOS name is automatically assigned to the <comp_name>. Since
the default for <netbios_name> is derived from the <comp_name>,
the <comp_name> must not contain any characters that are invalid
for a <netbios_name>.
In the case of disjoint namespaces, you must use the fully qualified
domain name for the <comp_name>. For example,
dm112-cge0.emc.com, not just dm112-cge0.
The <comp_name> can be up to 63 UTF-8 characters. The
<full_domain_name> must contain a dot (.). There cannot be a @ (at
sign) or - (dash) character. The name also cannot include white space,
tab characters, or the symbols: / \ : ; , = * + | [ ] ? < > "
CAUTION
Each computer name must be unique to the domain and the Data
Mover.
Note: See the Using International Character Sets with Celerra for details.
Only Windows NT security mode can be configured when UTF-8 is enabled.
[,alias=<alias_name>...]
Assigns an alias to the NetBIOS name. The <alias_name> must:
• be unique on a Data Mover
• be limited to 15 characters
• cannot begin with an @ (at sign) or - (dash) character.
• not include white space, tab characters, or the following
symbols: / \ : ; , = * + | [ ] ? < > "
[,hidden={y|n}]
By default, the computer name appears in the Network
Neighborhood. If hidden=y is specified, then the computer name
does not appear.
[,authentication={kerberos |all}]
Specifies the type of user authentication. The kerberos option
limits the server usage to Kerberos authentication; the all option
(default) allows both Kerberos and NTLM authentication.
[,netbios=<netbios_name>]
Specifies a <netbios_name> for the <comp_name> in place of the
default. The default for <netbios_name> is assigned
automatically and is derived from the first 15 characters of the
To Next Page
Loading...
Need help?
General
