326
Celerra Network Server Command Reference Manual
The server Commands
EXAMPLE #11 To enable the cge1 interface, type:
$ server_cifs server_2 -Enable cge1
server_2 : done
EXAMPLE #12 To display CIFS information for a Data Mover in a Windows 2000 or
later domain with internal usermapper, type:
$ server_cifs server_2
server_2 :
256 Cifs threads started
Security mode = NT
Max protocol = NT1
I18N mode = UNICODE
Home Directory Shares ENABLED, map=/.etc/homedir
Usermapper auto broadcast enabled
Usermapper[0] = [127.0.0.1] state:active (auto discovered)
Default WINS servers = 172.24.103.25:172.24.102.25
Enabled interfaces: (All interfaces are enabled)
Disabled interfaces: (No interface disabled)
Unused Interface(s):
if=cge1 l=172.24.102.243 b=172.24.102.255 mac=0:60:16:4:35:4e
DOMAIN NASDOCS FQDN=nasdocs.emc.com SITE=Default-First-Site-Name RC=3
SID=S-1-5-15-99589f8d-9aa3a5f-338728a8-ffffffff
>DC=WINSERVER1(172.24.102.66) ref=3 time=1 ms (Closest Site)
CIFS Server DM112-CGE0[NASDOCS] RC=2 (Hidden)
Alias(es): DM112-CGEA1
Full computer name=dm112-cge0.nasdocs.emc.com realm=NASDOCS.EMC.COM
Comment='EMC Celerra'
if=cge0 l=172.24.102.242 b=172.24.102.255 mac=0:60:16:4:35:4f
wins=172.24.102.25:172.24.103.25
FQDN=dm112-cge0.nasdocs.emc.com (Updated to DNS)
Password change interval: 30 minutes
Last password change: Thu Oct 27 15:59:17 2005
Password versions: 2
See Example #5 for a description of command outputs.
EXAMPLE #13 To display CIFS information for a Data Mover in a Windows 2000 or
later domain with external usermapper, type:
$ server_cifs server_2
server_2 :
256 Cifs threads started
Security mode = NT
Max protocol = NT1
To Next Page
Loading...
