server_date
339
The server Commands
Where:
EXAMPLE #11 To stop time services for a Data Mover, type:
$ server_date server_2 timesvc stop
server_2 : done
EXAMPLE #12 To delete the time service configuration for a Data Mover, type:
$ server_date server_2 timesvc delete ntp
server_2 : done
Value Definition
time date and time known to the Data Mover.
type time service protocol configured on the Data Mover.
sync delay whether sync delay is on or off.
interval time interval between polls.
hosts specifies the IP address of the time server.
To Next Page
Loading...
Need help?
General
