EMC Celerra User Manual

server_devconfig
341
The server Commands
CAUTION
!
Disabling the -discovery option should only be done under the
direction of an EMC Customer Service Engineer.
[-monitor {y|n}]
Displays the progress of the query and discovery operations.
[-Force {y|n}]
Overrides the health check failures and changes the storage
configuration.
CAUTION
!
High availability can be lost when changing the storage
configuration. Changing the storage configuration should only
be done under the direction of an EMC Customer Service
Engineer.
-list -scsi [<chain_number>] {-disks | -nondisks | -all}
Lists the SCSI device table database that has been saved on the Data
Mover. The <chain_number> specifies a SCSI chain number.
Note: Fibre Channel devices appear as SCSI devices, therefore, chain
numbers may be different for Fibre Channel.
The -disks option limits operations to disks. The -nondisks option
limits operations to non-disks such as tapes, juke boxes, and
gatekeeper devices. The -all option permits all SCSI devices (disks
and non-disks).
-probe -scsi [<chain_number>] {-disks | -nondisks | -all}
Queries and displays the SCSI devices without saving them into the
database. The <chain_number> specifies a SCSI chain number.
Note: Fibre channel devices appear as SCSI devices, therefore, chain numbers
may be different for Fibre Channel.
The -disks option limits operations to disks. The -nondisks option
limits operations to non-disks such as tapes, juke boxes, and
gatekeeper devices. The -all option permits all SCSI devices (disks
and non-disks).

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English