EMC Celerra User Manual

342
Celerra Network Server Command Reference Manual
The server Commands
-rename <old_name> <new_name>
Renames the specified non-disk from the <old_name> to
<new_name>. The -rename option is available for non-disks only.
SEE ALSO Celerra Network Server System Operations, nas_disk, nas_storage.
BACKEND OUTPUT The number associated with the storage device is dependent on the
attached backend of the system. CLARiiON backends display a
prefix of APM before a set of integers, for example,
APM00033900124-0019. For example, Symmetrix backends display as
002804000190-003C.
EXAMPLE #1 For the Celerra Network Server with a CLARiiON backend, to list all
devices, type:
$ server_devconfig server_2 -list -scsi -all
server_2:
Scsi Disk Table
Director Port
name addr num type num sts stor_id stor_dev
root_disk c0t0l0 APM00043807043 0000
root_disk c16t0l0 APM00043807043 0000
root_ldisk c0t0l1 APM00043807043 0001
root_ldisk c16t0l1 APM00043807043 0001
d3 c0t0l2 APM00043807043 0002
d3 c16t0l2 APM00043807043 0002
d4 c0t0l3 APM00043807043 0003
d4 c16t0l3 APM00043807043 0003
d5 c0t0l4 APM00043807043 0004
d5 c16t0l4 APM00043807043 0004
d6 c0t0l5 APM00043807043 0005
d6 c16t0l5 APM00043807043 0005
d7 c0t1l0 APM00043807043 0010
d7 c16t1l0 APM00043807043 0010
d8 c16t1l1 APM00043807043 0011
d8 c0t1l1 APM00043807043 0011
Scsi Device Table
name addr type info
gk01 c0t0l0 disk 5 020700000000APM00043807043
ggk01 c0t1l0 disk 5 020710001000APM00043807043
gk161 c16t1l1 disk 5 020711001100APM00043807043
For the Celerra Network Server with a Symmetrix backend, to list all
of the devices in the SCSI table, type:
$ server_devconfig server_2 -list -scsi -all
server_2 :
Scsi Disk Table
Director Port

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English