server_http
365
The server Commands
EXAMPLE #5 To display information for the HTTP protocol connection, type:
$ server_http server_2 -info dhsm
server_2 :
DHSM:
users: valid user1 user2 user3 user4
allowed IPs: 10.240.12.146 172.24.102.20 172.24.102.21
threads: 40
Where:
EXAMPLE #6 To remove the HTTP connection, type:
$ server_http server_2 -remove dhsm -users user1,user2 -hosts 10.240.12.146
server_2 : done
Value Definition
users whether Celerra FileMover is enabled or disabled on the file system.
allowed IPs whether the Celerra Network Server should notify CIFS clients that a file is migrated.
threads timeout value, in seconds, before Windows popup notification is sent to CIFS client.
To Next Page
Loading...
