EMC Celerra

376
Celerra Network Server Command Reference Manual
The server Commands
EXAMPLE #2 To rename a target alias, type:
$ server_iscsi server_2 -target -rename t1 t2
server_2 : done
EXAMPLE #3 To bind target portal groups as specified by the alias t1 to an existing
target, 200:np=172.24.102.243, type:
$ server_iscsi server_2 -target -bind t1 200:np=172.24.102.243
server_2 : done
EXAMPLE #4 To list all targets, type:
$ server_iscsi server_2 -target -list
server_2 :
alias_name portal_groups iscsi_name
t1 100,200 iqn.1992-05.com.emc:apm000438070430000-1
Where:
EXAMPLE #5 To create a new standard iSCSI logical unit number (LUN) of 0 and
assign it to an existing target, t1, with a specified size of 102400 MB
on file system, ufs1, type:
$ server_iscsi server_2 -lun -number 0 -create t1 -size 102400 -fs ufs1
server_2 : done
EXAMPLE #6 To create a new virtually provisioned iSCSI logical unit number
(LUN) of 1 and assign it to an existing target, t1, with a specified size
of 10 GB on file system, ufs1, type:
$ server_iscsi server_2 -lun -number 1 -create t1 -size 10G -fs ufs1 -vp yes
server_2 : done
EXAMPLE #7 To create a new protected, read-only iSCSI LUN of 2 and assign it to
an existing target, t1, with a specified size of 10 GB on file system,
ufs1, type:
$ server_iscsi server_2 -lun -number 2 -create t1 -size 10G -fs ufs1 -readonly yes
server_2 : done
EXAMPLE #8 To extend LUN 0 on target, t1, by 4096 MB, type:
$ server_iscsi server_2 -lun -extend 0 -target t1 -size 4096M
server_2 : done
Value Definition
alias_name alias for the iSCSI target’s qualified name.
portal_groups portal groups used by the target.
iscsi_name iSCSI qualified name of the target.