EMC Celerra

378
Celerra Network Server Command Reference Manual
The server Commands
path=/ufs1/fs22_T1_LUN0_APM00043807043_0000/fs22_T1_LUN0_APM00043807043_0000
(extended)
replication=none
max_extension_size=84441MB
Statistics:
Total SCSI CDBs: 6837
Read: 2381 Failed: 0 Blks read: 147769
Write: 4314 Failed: 0 Blks written: 449833
Logical Unit 1 on target t1:
(Production) fsid=22 size=10240MB alloc=53MB virtually_provisioned
path=/ufs1/fs22_T1_LUN1_APM00043807043_0000/fs22_T1_LUN1_APM00043807043_0000
replication=none
max_extension_size=2086911MB
Statistics:
Total SCSI CDBs: 2272
Read: 1179 Failed: 0 Blks read: 111831
Write: 973 Failed: 0 Blks written: 110617
Logical Unit 2 on target t1:
(Production) fsid=22 size=10240MB alloc=0MB dense
path=/ufs1/fs22_T1_LUN2_APM00043807043_0000/fs22_T1_LUN2_APM00043807043_0000
replication=available destination
max_extension_size=84441MB
Statistics:
Total SCSI CDBs: 0
Read: 0 Failed: 0 Blks read: 0
Write: 0 Failed: 0 Blks written: 0
EXAMPLE #12 To set a LUN mask on target, t1, for initiator,
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com, with the
access rights to LUNs 0 and 1, type:
$ server_iscsi server_2 -mask -set t1 -initiator
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com -grant 0,1
server_2 : done
EXAMPLE #13 To display a list of LUN masks, type:
$ server_iscsi server_2 -mask -list
server_2 :
target: t1
initiator_name grant LUNs
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com 0-1