EMC Celerra User Manual

server_mount
403
The server Commands
EXAMPLE #8 To mount ufs1, on mount point, /ufs1, with uncached writes turned
on, type:
$ server_mount server_2 -option uncached ufs1 /ufs1
server_2 : done
EXAMPLE #9 To mount ufs1, on mount point, /ufs1, with the trigger level of
notification change set to 256, type:
$ server_mount server_2 -option triggerlevel=256 ufs1 /ufs1
server_2 : done
EXAMPLE #10 To mount ufs1, on mount point, /ufs1, change the default name of the
checkpoint in the ".ckpt" directory, and specify a mount point, type:
$ server_mount server_2 -option cvfsname=test ufs1 /ufs1
server_2 : done
EXAMPLE #11 To mount ufs1, on mount point, /ufs1, with the access policy set to
MIXED, type:
$ server_mount server_2 -option accesspolicy=MIXED ufs1 /ufs1
server_2 : done
EXAMPLE #12 To mount ufs1, on mount point, /ufs1, with the access policy set to
MIXED_COMPAT, type:
$ server_mount server_2 -option accesspolicy=MIXED_COMPAT ufs1 /ufs1
server_2 : done
EXAMPLE #13 To mount ufs1, as a part of the nested file system, nmfs1, type:
$ server_mount server_2 ufs1 /nmfs1/ufs1
server_2 : done
EXAMPLE #14 To mount ufs1, specifying that no file is granted to the NFSv4 client,
type:
$ server_mount server_2 ufs1 nfsv4delegation=NONE
server_2 : done

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English