EMC Celerra

434
Celerra Network Server Command Reference Manual
The server Commands
EXAMPLE #5 To display the parameters for the PAX facility, type:
$ server_param server_2 -facility PAX -info -all
$ server_param server_2 -facility PAX -info -all
server_2 :
name = paxWriteBuff
facility_name = PAX
default_value = 64
current_value = 64
configured_value =
user_action = none
change_effective = immediate
range = (1,1024)
description = Number of buffers in tape write queue per backup session
name = dump
facility_name = PAX
default_value = 0
current_value = 0
configured_value =
user_action = reboot DataMover
change_effective = reboot DataMover
range = (0,1)
description = Whether to force dump format backup
name = allowVLCRestoreToUFS
facility_name = PAX
default_value = 0
current_value = 0
configured_value =
user_action = reboot DataMover
change_effective = reboot DataMover
range = (0,1)
description = Whether to allow VLC backup to be restored to UFS file
system
name = checkUtf8Filenames
facility_name = PAX
default_value = 1
current_value = 1
configured_value =
user_action = reboot DataMover
change_effective = reboot DataMover
range = (0,1)
description = Whether to check if file names are in valid utf8 format
name = paxStatBuff
facility_name = PAX
default_value = 128
current_value = 128
configured_value =
user_action = none