EMC Celerra

server_sysconfig
467
The server Commands
Where:
EXAMPLE #10 To create an aggregated link using the LACP protocol with load
balancing method set to mac, type:
$ server_sysconfig server_2 -virtual -name trk0_la -create trk -option
"device=cge2,cge3 protocol=lacp lb=mac"
server_2 : done
EXAMPLE #11 To delete an Ethernet channel, trk0_ec, type:
$ server_sysconfig server_2 -virtual -delete -Force trk0_ec
server_2 : done
Value Definition
active name of the active device in the FSN.
primary primary device in the FSN.
standby standby device in the FSN.