EMC Celerra User Manual

486
Celerra Network Server Command Reference Manual
The server Commands
EXAMPLE #2 To display the status of the virus checker, type:
$ server_viruschk server_2 -audit
server_2 :
Total Requests : 138
Requests in progress : 25
NO ANSWER from the Virus Checker Servers : 0
ERROR_SETUP : 0
FILE_NOT_FOUND : 0
ACCESS_DENIED : 0
FAIL : 0
TIMEOUT : 0
min=70915 uS, max=1164891 uS, average=439708 uS
15 File(s) in the collector queue
10 File(s) processed by the AV threads
Read file '/.etc/viruschecker.audit' to display the list of pending requests
EXAMPLE #3 To update the virus checker configuration file that is resident on the
Data Mover, type:
$ server_viruschk server_2 -update
server_2 : done
EXAMPLE #4 To set the access time for the virus checker configuration file, type:
$ server_viruschk server_2 -set accesstime=now
server_2 : done
EXAMPLE #5 To start a scan on file system, type:
$ server_viruschk server_2 –fsscan ufs1 -create
server_2 : done
EXAMPLE #6 To check the scan of a file system, type:
$ server_viruschk server_2 -fsscan ufs1 -list
server_2 :
FileSystem 24 mounted on /ufs1:
8 dirs scanned and 22 files submitted to the scan engine
firstFNN=0x0, lastFNN=0xe0f34b70, queueCount=0, burst=10
EXAMPLE #7 To check the scan status on all file systems, type:
$ server_viruschk server_2 -fsscan
server_2 :
FileSystem 24 mounted on /ufs1:
8 dirs scanned and 11 files submitted to the scan engine
firstFNN=0x0, lastFNN=0xe0eba410, queueCount=0, burst=10
FileSystem 25 mounted on /ufs2:
9 dirs scanned and 11 files submitted to the scan engine
firstFNN=0x0, lastFNN=0xe0010b70, queueCount=0, burst=10

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English