EMC Celerra User Manual

fs_dhsm
51
The fs Commands
[-timeout <sec>]
Specifies the timeout value in seconds. By default, Celerra’s
HTTP client waits 30 seconds for a reply from the HTTP server
and then retries the operation once before commencing the
failover operation.
SEE ALSO Using Celerra FileMover, server_checkup, server_http, server_nfs.
EXAMPLE #1 To enable Celerra FileMover on a file system, type:
$ fs_dhsm -modify ufs1 -state enabled
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
Done
Where:
EXAMPLE #2 To create a CIFS connection for ufs1 to the secondary file system
\\winserver2.nasdocs.emc.com\dhsm1 with a specified
administrative account nasdocs.emc.com\Administrator and local
server dm102-cge0:
$ fs_dhsm -connection ufs1 -create -type cifs -admin
'nasdocs.emc.com\Administrator' -secondary
'\\winserver2.nasdocs.emc.com\dhsm1' -local_server dm102-cge0
Enter Password:********
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
cid = 0
Value Definition
state
whether Celerra FileMover is enabled or disabled on the file system.
offline attr
whether CIFS clients should be notified that a file is migrated.
popup timeout
timeout value in seconds, before Windows popup notification is sent to the CIFS client.
backup
nature of CIFS network backups.
read policy override
migration method option used to override the read method specified in the stub file.
log file
whether FileMover logging is enabled or disabled.
max log size
maximum size of the log file.

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English