To Next Page

To Previous Page

Celerra Network Server Command Reference Manual

The fs Commands

When specifying the password with this option, be aware it is

unmasked, and visible to other users. The command may also

be read from the log of the shell.

[-admin [<fqdn>\]<admin_name>]

Specifies the <admin_name> used to make the CIFS

connection. If an optional <fqdn> is specified, it must be a

fully qualified domain name. If the <fqdn> is not specified, the

-local_server domain is used.

[-wins <address>]}

Specifies a WINS server to resolve names in a Windows NT

domain.

FOR HTTP

CONNECTIONS

{[-http_server <host>]

Specifies the hostname of the secondary storage HTTP server.

-httpport <port>

Specifies the remote port number that the Data Mover delivers

the HTTP request to. If not specified, the Data Mover issues

HTTP requests to port 80 on the secondary storage HTTP

server.

-localport <port>

Specifies the local port number the Data Mover uses to issue

HTTP requests to the web server running on the secondary

storage. The <port> specified should be an integer no less than

1024. If not specified, the Data Mover selects a port to issue the

HTTP requests.

Note: If you attempt to create multiple HTTP connections using

identical end points with different attributes such as, -cgi, -user,

-password, -localPort, -httpPort, the connection will fail.

[-user <username>]

An optional attribute used to define the username the HTTP

client uses if digest authentication is required by the

secondary storage HTTP server.

[-password <password>]

Allows the user to specify the admin password. The password

is not recorded in the command log. If the -password option is

given but no password is specified, the user is prompted

interactively.

EMC Celerra User Manual

Other manuals for EMC Celerra