60
Celerra Network Server Command Reference Manual
The fs Commands
EXAMPLE #18 To create an HTTP connection for ufs1 to the secondary file system
using CGI connections to access migrated file data via a CGI
application, type:
$ fs_dhsm -connection ufs1 -create -type http -secondary
http://www.nasdocs.emc.com/cgi-bin/access.sh
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
cid = 0
type = HTTP
secondary = http://www.nasdocs.emc.com/cgi-bin/access.sh
state = enabled
read policy override = none
write policy = full
user =
options =
Done
To Next Page
Loading...
