fs_dhsm
59
The fs Commands
Done
See Example #1 for a description of command output.
EXAMPLE #16 To delete the Celerra FileMover connection 0 for ufs1, type:
$ fs_dhsm -connection ufs1 -delete 0
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
Done
See Example #1 for a description of command output.
EXAMPLE #17 To create an HTTP connection for ufs1 to the secondary file system
/export/dhsm1 on the web server http://172.24.102.115 which has
direct access to the storage, type:
$ fs_dhsm -connection ufs1 -create -type http -secondary
http://172.24.102.115/export/dhsm1 -cgi n
ufs1:
state = enabled
offline attr = on
popup timeout = 10
backup = offline
read policy override = full
log file = on
max log size = 25MB
cid = 2
type = HTTP
secondary = http://172.24.102.115/export/dhsm1
state = enabled
read policy override = none
write policy = full
user =
options = cgi=n
Done
See Example #2 for a description of command output.
To Next Page
Loading...
