EasyManuals Logo

EMC Celerra User Manual

EMC Celerra
522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
80
Celerra Network Server Command Reference Manual
The fs Commands
disk=d19 stor_dev=APM00042000818-0018 addr=c0t0l11 server=server_2
disk=d19 stor_dev=APM00042000818-0018 addr=c32t0l11 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c0t0l12 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c32t0l12 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c16t0l12 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c48t0l12 server=server_2
id = 30
name = dst_ufs1
acl = 0
in_use = True
type = rawfs
worm = off
volume = v110
pool = clar_r5_performance
member_of = root_avm_fs_group_3:cs110
rw_servers=
ro_servers= server_2
rw_vdms =
ro_vdms =
backup_of = src_ufs1 Mon Jan 10 15:42:39 EST 2005
stor_devs = APM00043807043-0019,APM00043807043-0016,APM00043807043-0013,APM00043
807043-0014
disks = d16,d11,d13,d10
disk=d16 stor_dev=APM00043807043-0019 addr=c16t1l9 server=server_2
disk=d16 stor_dev=APM00043807043-0019 addr=c0t1l9 server=server_2
disk=d11 stor_dev=APM00043807043-0016 addr=c0t1l6 server=server_2
disk=d11 stor_dev=APM00043807043-0016 addr=c16t1l6 server=server_2
disk=d13 stor_dev=APM00043807043-0013 addr=c16t1l3 server=server_2
disk=d13 stor_dev=APM00043807043-0013 addr=c0t1l3 server=server_2
disk=d10 stor_dev=APM00043807043-0014 addr=c0t1l4 server=server_2
disk=d10 stor_dev=APM00043807043-0014 addr=c16t1l4 server=server_2
done
Where:
Value Definition
name name assigned to the file system.
acl access control value for a file system. See nas_acl.
in_use if a file system is registered into the mount table of a Data Mover.
type type of file system. See -list for a description of the types.
worm whether the File-Level retention feature is enabled.
volume volume on which the file system resides.
pool volume pool for the file system.
member_of AVM file system group if the file system was created using AVM.
rw_servers servers with read/write access to a file system.
ro_servers servers with read-only access to a file system.
rw_vdms VDM servers with read/write access to a file system.
ro_vdms VDM servers with read-only access to a file system.
ckpts checkpoint names associated with the file system.
ip_copies name of the destination file system where the source file system is replicated.

Table of Contents

Other manuals for EMC Celerra

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EMC Celerra and is the answer not in the manual?

EMC Celerra Specifications

General IconGeneral
BrandEMC
ModelCelerra
CategoryServer
LanguageEnglish

Related product manuals