EMC Celerra - Page 85

fs_replicate
85
The fs Commands
disk=d21 stor_dev=APM00042000818-0014 addr=c32t0l15 server=server_2
disk=d12 stor_dev=APM00042000818-001B addr=c0t1l0 server=server_2
disk=d12 stor_dev=APM00042000818-001B addr=c32t1l0 server=server_2
disk=d12 stor_dev=APM00042000818-001B addr=c16t1l0 server=server_2
disk=d12 stor_dev=APM00042000818-001B addr=c48t1l0 server=server_2
disk=d19 stor_dev=APM00042000818-0018 addr=c16t0l11 server=server_2
disk=d19 stor_dev=APM00042000818-0018 addr=c48t0l11 server=server_2
disk=d19 stor_dev=APM00042000818-0018 addr=c0t0l11 server=server_2
disk=d19 stor_dev=APM00042000818-0018 addr=c32t0l11 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c0t0l12 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c32t0l12 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c16t0l12 server=server_2
disk=d10 stor_dev=APM00042000818-0017 addr=c48t0l12 server=server_2
done
See Example #1 for a description of the output.
EXAMPLE #4 To update the replication relationship by creating a delta set on the
source site and playing back a delta set on the destination site as well
as setting the timeout on src_ufs1 to 60 seconds, type:
$ fs_replicate -refresh src_ufs1 -option to=60
operation in progress (not interruptible)...
id = 58
name = src_ufs1
fs_state = active
type = replication
replicator_state = active
source_policy = NoPolicy
high_water_mark = 600
time_out = 60
current_delta_set = 1
current_number_of_blocks = 0
flow_control = inactive
total_savevol_space = 1048576 KBytes
savevol_space_available = 917504 KBytes (Before Flow Control)
id = 59
name = dst_ufs1:cs110
type = playback
playback_state = active
high_water_mark = 600
time_out = 600
current_delta_set = 0
flow_control = inactive
total_savevol_space = 1048576 KBytes
savevol_space_available = 917504 KBytes (Before Flow Control)
outstanding delta sets:
Delta Source_create_time Blocks
-------- ------------------- ---------
0 2005-01-25 14:31:51 2