Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual

Transmitter Electronics Enclosure removalFigure 3-26:
A. Transmitter electronics enclosure
B. Base enclosure bolts
C. Base enclosure
5. Use a 3 mm flat head screw driver and disconnect the Acquisition cable terminal
block and the transducer wire terminal blocks from the Acquisition Module inside of
the Base enclosure.
Meter repairs
Maintenance and Troubleshooting manual 83

Emerson Daniel 3410 Series Specifications

General

Brand	Emerson
Model	Daniel 3410 Series
Category	Measuring Instruments
Language	English