Inspection and Unpacking
13 Liebert
®
CRV
™
3.2.1 Handling the Unit While it is Packaged
Figure 7 Recommended unit handling equipment
• Transport the packaged unit using a forklift, pallet jack or by overhead lift with slings and
spreader bars that are rated for the weight of the unit (see tables above).
• When using a forklift or pallet jack, make sure the forks (if adjustable) are spread to the widest
allowable distance to still fit under the skid. Make sure the fork length is suitable for the skid
length. Skid length for 600mm (24") model is 60" (1524mm). Skid length for 300mm (12") model is
54" (1372mm)
• Do not lift the packaged unit any higher than 4" (102mm). All personnel except those moving the
Liebert CRV must be kept 12' (3.7m) or more from the unit while it is being moved.
• If the unit must be lifted higher than 4" (102mm), all personnel not directly involved in moving
the Liebert CRV must be 20' (5m) or more from the unit.
Table 5 Shipping weights
Model
No.
Domestic Packaging, lb (kg) Export Packaging, lb (kg)
Air Water/Glycol Chilled Water Air Water/Glycol Chilled Water
CR019 598 (271) — — 721 (327) — —
CR020 846 (384) 879 (399) — 953 (432) 986 (447) —
CR035 912 (414) 956 (434) — 1019 (462) 1063 (482) —
CR040 — — 835 (379) — — 942 (427)
Forklift
Pallet Jack
Spreader Bars
and Slings
To Next Page
Loading...
