Emerson Liebert CRV - 10.4.3 Adjust Blocker Plate-600 Mm (24) Models; Figure 52 Adjust Air-Blocking Plate-600 Mm (24) Models

Startup
79 Liebert
®
CRV
™
10.4.3 Adjust Blocker Plate—600mm (24") models
A blocker plate inside the display door should also be adjusted to direct air toward the racks the
Liebert CRV is intended to condition. The blocker plate can be installed on the left or right side of the
display door, or it can be removed to discharge air left and right.
Figure 52 Adjust air-blocking plate—600mm (24") models
To adjust the air blocker:
1. Remove the three screws that attach the blocker plate to the display door.
2. Reattach the blocker plate to the other side of the display door or to remove it.
Perforated Supply
Air Opening
Air Blocker Installed
Over Perforation
Attachment
Screws
FRONT VIEW
DPN001863
Pg. 2, Rev. 2
INSIDE DISPLAY DOOR