Emerson Liebert CRV - Unpacking and Removing the Unit from Skid

Inspection and Unpacking
15 Liebert
®
CRV
™
3.4 Unpacking the Liebert CRV—600mm (24") Models
1. Remove the lag bolts securing ramp to skid.
2. Place the ramp and the plastic bag with orange clips to the side for use in removing the unit from
the skid.
3. Remove the stretch film and corner/side packaging planks from around the unit.
4. Remove the unit bag when ready to install the unit.
Figure 9 Unpacking the Liebert CRV
197023
Rev. 5