Emerson Micro Motion 4200 - Page 84

7.1.6 Configure totalizer control from the display
Display Menu > Configuration > Security > Display Security > Totalizer Reset
ProLink III Device Tools > Configuration > Totalizer Control Methods
Field Communicator Configure > Manual Setup > Display > Display Behavior
You can enable or disable the operator's ability to start, stop, or reset totalizers from the display.
Note
Totalizers can be stopped, started, and reset as a group.
This parameter does not affect the operator's ability to start, stop, or reset totalizers using another tool.
Procedure
1. Enable or disable Reset Totalizers, as desired.
2. Enable or disable Start/Stop Totalizers, as desired.
7.1.7 Configure inventory control from the display
Display Menu > Configuration > Security > Display Security > Inventory Reset
ProLink III Device Tools > Configuration > Inventory Control Methods
Field Communicator Configure > Manual Setup > Display > Display Behavior
You can enable or disable the operator's ability to start, stop, or reset inventories from the display.
Note
Inventories can be started and stopped as a group, but must be reset individually. Inventories cannot be
started, stopped, or reset from the display by default; you must first manually enable these options before
they will appear in the display.
This parameter does not affect the operator's ability to start, stop, or reset inventories using another tool.
Procedure
1. Enable or disable Reset Inventories, as desired.
2. Enable or disable Start/Stop Inventories, as desired.
7.1.8 Configure security for the display
Display
Menu > Configuration > Security > Display Security
ProLink III Device Tools > Configuration > Transmitter Display > Display Security
Field Communicator Configure > Manual Setup > Display > Display Menus
You can configure a display password, and require the operator to enter the password to make any changes
to configuration through the display, or to access alert data through the display.
The operator always has read-only access to the configuration menus.
Configure device options and preferences Configuration and Use Manual
April 2019 MMI-20048166
84 Micro Motion 4200 Transmitters