Emerson PACSystems SLM042 - SNTP Configuration

PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 15
5.2.3 SNTP Configuration
The SNTP (Simple Network Time Protocol) settings allow you to synchronize switch clocks in
the Internet.
Figure 10: SNTP Configuration
The following table describes the labels in this screen.
Label
Description
SNTP Client
Enable or disable SNTP function to get the time from the SNTP
server.
Daylight Saving Time
Enable or disable daylight saving time function. When daylight
saving time is enabling, you need to configure the daylight saving
time period.
UTC Time zone
Set the switch location time zone. The following table lists the
different location time zone for your reference.