PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 29
5.5.3 SNMP – Agent Setting
You can set SNMP agent related information by Agent Setting Function.
Figure 21: SNMP - Agent Setting
The following table describes the labels in this screen.
SNMP Community should be set for SNMP. Four sets of
"Community String/Privilege" are supported. Each Community
String is maximum 32 characters. Keep empty to remove this
Community string.
5.5.4 SNMP –Trap Setting
A trap manager is a management station that receives traps, the system alerts generated by
the switch. If no trap manager is defined, no traps will issue. Create a trap manager by
entering the IP address of the station and a community string. To define management
stations as trap manager and enter SNMP community strings and selects the SNMP version.
To Next Page
Loading...
