Emerson PACSystems SLM042 - System Warning and Notifications

PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 34
5.6 System Warning
Warning function is very important for managing switch. You can manage switch by
SYSLOG, E-MAIL, and Fault Relay. It helps you to monitor the switch status on remote site.
When events occurred, the warning message will send to your appointed server, E-MAIL, or
relay fault to switch panel.
5.6.1 Syslog Setting
The SYSLOG is a protocol to transmit event notification messages across networks. Please
refer to RFC 3164 - The BSD SYSLOG Protocol
Figure 24: SYSLOG Setting
The following table describes the labels in this screen.
Label
Description
SYSLOG Mode
Disable: disable SYSLOG.
Client Only: log to local system.
Server Only: log to a remote SYSLOG server.
Both: log to both of local and remote server.
SYSLOGServer IP
Address
The remote SYSLOG Server IP address.
Apply
Click “Apply” to activate the configurations.
Help
Show help file.