Need help?Do you have a question about the Emerson Rosemount 2460 System Hub and is the answer not in the manual?
Procedures and instructions requiring special precautions for personnel safety.
Explains communication interfaces between field devices, host computer, and the System Hub.
Outlines the step-by-step procedure for a proper installation of the Rosemount 2460 System Hub.
Safety precautions for installation procedures, highlighting potential hazards and required actions.
Factors to consider before installing the system hub, including environmental conditions and firmware.
Details on the physical mounting and installation of the Rosemount 2460 System Hub.
Covers wiring, power supply, grounding, and cabling for the Rosemount 2460 System Hub.
Safety precautions related to the configuration process.
Guides the user through the basic configuration steps using the WinSetup program.
Safety precautions for operational procedures.
Explains how to check the redundancy status and perform operations.
Safety precautions for service and troubleshooting procedures.
Provides a troubleshooting chart for common operating problems and their solutions.
Step-by-step guide for replacing modem cards in the System Hub.
Instructions for replacing the terminal board within the System Hub.
Procedure for replacing the power supply unit of the System Hub.
Explains how to access and use the web-based graphical user interface for service functions.
Details on configuring Modbus TCP implementation and license options.
Procedure to reset the system hub to factory default configuration.
How to store the current system hub configuration for backup purposes.
How to recover the system hub database by loading a previously saved configuration.
Describes how to upgrade the firmware of the system hub.
Information on pairing and configuring redundant system hubs.
Options for write protecting the system hub to prevent unauthorized changes.
To Next Page
General
