Emerson Rosemount 2460 System Hub - Installation Plan

24
Reference Manual
00809-0100-2460, Rev DE
Installation
October 2018
Installation
3.3.1 Installation plan
It’s a good idea to make a plan of the installation in order to ensure that all components in the system are
properly specified. The plan should include the following:
 suitable locations for devices
 power budget
 cabling and connections (for example whether devices will be “daisy-chained” or not)
 specification of cable glands for the various devices
 location of terminators on the Tankbus (Rosemount 2410 Tank Hub)
 identification codes such as Unit ID/Device ID of each device
 assigned communication addresses for level gauges and other field devices to be stored in the Tank
Databases
(1)
of the Rosemount 2460 System Hub and Rosemount 2410 Tank Hub
See “Electrical installation” on page 28 for more information on cables and glands.
1. See the Rosemount Tank Gauging System Configuration manual (Document no. 00809-0300-5100) and the Rosemount 2410 Tank Hub Reference man-
ual (Document no. 00809-0100-2410) for more information.