Emerson Rosemount 2460 System Hub - Power Supply Connection

40
Reference Manual
00809-0100-2460, Rev DE
Installation
October 2018
Installation
3.5.10 Power supply connection
The Rosemount 2460 System Hub supports the following power supply:
24 - 48 Vdc, 100 - 250 Vac 50/60 Hz.
Note
Connector is of type IEC C16.
Note
The Rosemount 2460 is polarity insensitive for DC voltage input.
Figure 3-11. Power supply connection
Note
Connector is supplied by factory.
24 - 48 Vdc
100 - 250 Vac
50 - 60 Hz
Max 20 W
Protective ground