129
Reference Manual
00809-0100-2460, Rev DE
Service and Troubleshooting
October 2018
Service and Troubleshooting
6.15 Diagnostics
TankMaster WinSetup lets you view diagnostic registers for the Rosemount 2460 System Hub. The
diagnostic registers are selected from available Input and Holding Registers to provide a quick overview
of the current device status. For a more comprehensive troubleshooting you may use the View Input
Registers function in WinSetup.
To view and configure the diagnostic registers:
1. In the TankMaster WinSetup workspace select the Rosemount 2460 System Hub icon.
2. Click the right mouse button and choose View Diagnostic Registers.
Register values in the View Diagnostic Registers window are of read only type. They are loaded from the
device as the window is opened.
A table cell with a grey background color is of either Bitfield or ENUM type. By double-clicking the cell, an
Expanded Bitfield/ENUM window can be opened for more information.
If needed, the table cell values can be presented as hexadecimal numbers. This applies to registers of the
Bitfield and ENUM types. Select the Show in Hex check box to present Bitfield and ENUM registers as
hexadecimal numbers.
The Configure button lets you open the Configure Diagnostic Registers window, which allows you to
change the list of registers to appear in the View Diagnostic Registers window.
The Configure Diagnostic Registers window has a Log Setup button for access to the Register Log
Scheduling window which lets you setup a schedule for automatic start and stop of register logging.
Double-click the desired field to view
more detailed information
To Next Page
Loading...
