Emerson Rosemount 2460 System Hub - Tank Database Configuration

181
Whessoe Device Configuration
Whessoe Device Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
Appendix E Whessoe Device Configuration
Tank Database configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 181
Advanced Whessoe configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 184
E.1 Tank Database configuration
This section describes how to configure the Tank Database of the Rosemount
™
2460 System Hub for
supported Whessoe devices. See also “Modem Multi Loop” on page 153 for information on hardware.
1. In TankMaster WinSetup right-click the Rosemount 2460 System Hub that the device is connected to
and choose Properties.
2. Select the Tank Database tab.
Tank Database