Emerson Rosemount 2460 System Hub - Tank Database Configuration

213
Varec
®
Device Configuration
Varec
®
Device Configuration
October 2018
Reference Manual
00809-0100-2460, Rev DE
Appendix I Varec
®
Device Configuration
Tank Database configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 213
Advanced Varec configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 216
I.1 Tank Database configuration
This section describes how to configure the Tank Database of the Rosemount
™
2460 System Hub for
supported Varec
®
devices. See also “Varec” on page 152 for information on hardware.
1. In TankMaster WinSetup right-click the Rosemount 2460 System Hub that the device is connected to
and choose Properties.
2. Select the Tank Database tab.
Tank Database