25
Reference Manual
00809-0100-2460, Rev DE
Installation
October 2018
Installation
3.4 Mechanical installation
See also Mechanical Installation Drawing D7000001-927 for further information.
The housing of the Rosemount 2460 is designed with four holes for attaching the 2460 to a wall using
four screws.
Note
Ensure that the Rosemount 2460 is installed in a way that minimizes vibration and mechanical shock.
1. Mark the positions of the four screws to be used for attaching the 2460 to the wall. A mounting
template (see Figure 3-1 on page 27) is shipped with the 2460 which may be used for this purpose.
2. Drill four holes with appropriate size to fit screw diameter 6 mm.
3. Loosen the two screws (M6 x 2) on the Rosemount 2460 housing that keep the lid in closed position
and open the lid.
2460-
TAG:
S/N:
MFG (yymmdd):
DEVICE ID:
MAINS: 100-250VAC 50/60Hz, 24-48VDC 20W
MADE IN GOTHENBURG SWEDEN
To Next Page
Loading...
