140
Reference Manual
00809-0100-2460, Rev DE
Service and Troubleshooting
October 2018
Service and Troubleshooting
6.21 Redundancy
The Redundancy tab lets you pair two Rosemount
™
2460 System Hubs. Once paired, the system hubs
can be configured for redundancy operation. See “Redundancy setup via Web GUI” on page 80 for more
information on how to setup redundant system hubs.
6.21.1 Pairing two system hubs
1. Open the Web Graphical User Interface (GUI). See section “Using the web interface” on page 114) for
more information on how to use the Web GUI.
2. Select the Redundancy menu option.
3. Expand the Pair option and verify that a green symbol indicates that the two devices can be paired.
4. Click the Pair button.
5. Verify that the redundant system hubs are successfully paired and changed to redundancy mode.