203
Fast Polling
Fast Polling
October 2018
Reference Manual
00809-0100-2460, Rev DE
Appendix G Fast Polling
Configure fast polling with common threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 204
Configure fast polling with individual thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 206
This section describes how to enable and configure fast polling for devices that support this function.
Fast polling can be used to increase the sampling rate for tanks with level rates above a certain threshold
value. Two fast polling options are supported:
Table G-1. Fast Polling options
Option Description
Common Settings
A general threshold setting that applies for all servo tanks.
See “Configure fast polling with common threshold” on page 204.
Individual Settings
Individual threshold values for different tanks.
See “Configure fast polling with individual thresholds” on page 206.
To Next Page
Loading...
