Emerson PACSystems SLM042 - SMTP Setting

PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 36
5.6.3 SMTP Setting
The SMTP is Short for Simple Mail Transfer Protocol. It is a protocol for e-mail transmission
across the Internet. Please refer to RFC 821 - Simple Mail Transfer Protocol.
Figure 26: SMTP Setting
The following table describes the labels in this screen.
Label
Description
E-mail Alarm
Enable/Disable transmission system warning events by e-mail.
Sender E-mail Address
The SMTP server IP address
Mail Subject
The Subject of the mail
Authentication
Username: the authentication username.
Password: the authentication password.
Confirm Password: re-enter password.
Recipient E-mail
Address
The recipient's E-mail address. It supports up to 6 recipients per
mail.
Apply
Click “Apply” to activate the configurations.
Help
Show help file.