Emerson PACSystems SLM042 - Redundant Ring Configuration

PACSystems Ethernet Switch SLM042 User Manual Section 5
GFK-3123A Jan 2020
Web Management 21
The following table describes the labels in this screen.
Label
Description
Active
Activate the fast recovery mode.
Port
Port can be configured as 6 priorities. Only the port with highest
priority will be the active port. 1st Priority is the highest.
Apply
Click “Apply” to activate the configurations.
5.3.2 Redundant Ring
Redundant Ring is the most powerful Ring in the world. The recovery time of Ring is less than
10ms. Itcan reduce unexpected damage caused by network topology change. Redundant
Ring Supports 3 Ring topology: Ring, Coupling Ring and Dual Homing.
Figure 15: Redundant Ring